What is this shape that looks like a rectangle with rounded ends called?












18















A rounded rectangle but with full radius.



This cannot be a rounded rectangle because those are not fully or "perfectly" rounded at the two ends. This is more like an elongated circle? A flat cylinder?



I searched a lot, but among all guides or pictures that identify and name different shapes, I couldn't get this particular shape. The closest I could get was a stretched ellipse.



There are only two processes to get this shape as far as I know: the first one is making a long rectangle and making its corner radius exactly half of the height. The second one is putting two circles a distance apart and adding a rectangle between those. So, are these something like "perfect rounded rectangles" or "rectangular circles"?










share|improve this question




















  • 2





    I would call it "rounded stroke cap"

    – Vinny
    Nov 12 '18 at 16:03











  • Yes, that seems like a good name. This is a stroke cap after all, while the stroke has rounded corners. But we specifically make this shape too, in general designs, using rounded rectangles and not strokes. This shape might be an important, big, and bold part of the layout. Calling it just a stroke cap won't be enough.

    – Abhimanyu
    Nov 12 '18 at 16:07






  • 1





    I see... In this case, I guess "Stadium shape" as suggested by @Danielillo might be more suitable.

    – Vinny
    Nov 12 '18 at 16:16






  • 2





    This was asked a long time ago on math.stackexchange math.stackexchange.com/q/539262/29335

    – rschwieb
    Nov 13 '18 at 4:25






  • 1





    Ah, someone even pointed out a second math.se version below I was previously unaware of: math.stackexchange.com/q/5465/29335

    – rschwieb
    Nov 14 '18 at 14:29


















18















A rounded rectangle but with full radius.



This cannot be a rounded rectangle because those are not fully or "perfectly" rounded at the two ends. This is more like an elongated circle? A flat cylinder?



I searched a lot, but among all guides or pictures that identify and name different shapes, I couldn't get this particular shape. The closest I could get was a stretched ellipse.



There are only two processes to get this shape as far as I know: the first one is making a long rectangle and making its corner radius exactly half of the height. The second one is putting two circles a distance apart and adding a rectangle between those. So, are these something like "perfect rounded rectangles" or "rectangular circles"?










share|improve this question




















  • 2





    I would call it "rounded stroke cap"

    – Vinny
    Nov 12 '18 at 16:03











  • Yes, that seems like a good name. This is a stroke cap after all, while the stroke has rounded corners. But we specifically make this shape too, in general designs, using rounded rectangles and not strokes. This shape might be an important, big, and bold part of the layout. Calling it just a stroke cap won't be enough.

    – Abhimanyu
    Nov 12 '18 at 16:07






  • 1





    I see... In this case, I guess "Stadium shape" as suggested by @Danielillo might be more suitable.

    – Vinny
    Nov 12 '18 at 16:16






  • 2





    This was asked a long time ago on math.stackexchange math.stackexchange.com/q/539262/29335

    – rschwieb
    Nov 13 '18 at 4:25






  • 1





    Ah, someone even pointed out a second math.se version below I was previously unaware of: math.stackexchange.com/q/5465/29335

    – rschwieb
    Nov 14 '18 at 14:29
















18












18








18


2






A rounded rectangle but with full radius.



This cannot be a rounded rectangle because those are not fully or "perfectly" rounded at the two ends. This is more like an elongated circle? A flat cylinder?



I searched a lot, but among all guides or pictures that identify and name different shapes, I couldn't get this particular shape. The closest I could get was a stretched ellipse.



There are only two processes to get this shape as far as I know: the first one is making a long rectangle and making its corner radius exactly half of the height. The second one is putting two circles a distance apart and adding a rectangle between those. So, are these something like "perfect rounded rectangles" or "rectangular circles"?










share|improve this question
















A rounded rectangle but with full radius.



This cannot be a rounded rectangle because those are not fully or "perfectly" rounded at the two ends. This is more like an elongated circle? A flat cylinder?



I searched a lot, but among all guides or pictures that identify and name different shapes, I couldn't get this particular shape. The closest I could get was a stretched ellipse.



There are only two processes to get this shape as far as I know: the first one is making a long rectangle and making its corner radius exactly half of the height. The second one is putting two circles a distance apart and adding a rectangle between those. So, are these something like "perfect rounded rectangles" or "rectangular circles"?







shapes terminology






share|improve this question















share|improve this question













share|improve this question




share|improve this question








edited Nov 14 '18 at 8:40









Glorfindel

2333615




2333615










asked Nov 12 '18 at 15:58









AbhimanyuAbhimanyu

2701312




2701312








  • 2





    I would call it "rounded stroke cap"

    – Vinny
    Nov 12 '18 at 16:03











  • Yes, that seems like a good name. This is a stroke cap after all, while the stroke has rounded corners. But we specifically make this shape too, in general designs, using rounded rectangles and not strokes. This shape might be an important, big, and bold part of the layout. Calling it just a stroke cap won't be enough.

    – Abhimanyu
    Nov 12 '18 at 16:07






  • 1





    I see... In this case, I guess "Stadium shape" as suggested by @Danielillo might be more suitable.

    – Vinny
    Nov 12 '18 at 16:16






  • 2





    This was asked a long time ago on math.stackexchange math.stackexchange.com/q/539262/29335

    – rschwieb
    Nov 13 '18 at 4:25






  • 1





    Ah, someone even pointed out a second math.se version below I was previously unaware of: math.stackexchange.com/q/5465/29335

    – rschwieb
    Nov 14 '18 at 14:29
















  • 2





    I would call it "rounded stroke cap"

    – Vinny
    Nov 12 '18 at 16:03











  • Yes, that seems like a good name. This is a stroke cap after all, while the stroke has rounded corners. But we specifically make this shape too, in general designs, using rounded rectangles and not strokes. This shape might be an important, big, and bold part of the layout. Calling it just a stroke cap won't be enough.

    – Abhimanyu
    Nov 12 '18 at 16:07






  • 1





    I see... In this case, I guess "Stadium shape" as suggested by @Danielillo might be more suitable.

    – Vinny
    Nov 12 '18 at 16:16






  • 2





    This was asked a long time ago on math.stackexchange math.stackexchange.com/q/539262/29335

    – rschwieb
    Nov 13 '18 at 4:25






  • 1





    Ah, someone even pointed out a second math.se version below I was previously unaware of: math.stackexchange.com/q/5465/29335

    – rschwieb
    Nov 14 '18 at 14:29










2




2





I would call it "rounded stroke cap"

– Vinny
Nov 12 '18 at 16:03





I would call it "rounded stroke cap"

– Vinny
Nov 12 '18 at 16:03













Yes, that seems like a good name. This is a stroke cap after all, while the stroke has rounded corners. But we specifically make this shape too, in general designs, using rounded rectangles and not strokes. This shape might be an important, big, and bold part of the layout. Calling it just a stroke cap won't be enough.

– Abhimanyu
Nov 12 '18 at 16:07





Yes, that seems like a good name. This is a stroke cap after all, while the stroke has rounded corners. But we specifically make this shape too, in general designs, using rounded rectangles and not strokes. This shape might be an important, big, and bold part of the layout. Calling it just a stroke cap won't be enough.

– Abhimanyu
Nov 12 '18 at 16:07




1




1





I see... In this case, I guess "Stadium shape" as suggested by @Danielillo might be more suitable.

– Vinny
Nov 12 '18 at 16:16





I see... In this case, I guess "Stadium shape" as suggested by @Danielillo might be more suitable.

– Vinny
Nov 12 '18 at 16:16




2




2





This was asked a long time ago on math.stackexchange math.stackexchange.com/q/539262/29335

– rschwieb
Nov 13 '18 at 4:25





This was asked a long time ago on math.stackexchange math.stackexchange.com/q/539262/29335

– rschwieb
Nov 13 '18 at 4:25




1




1





Ah, someone even pointed out a second math.se version below I was previously unaware of: math.stackexchange.com/q/5465/29335

– rschwieb
Nov 14 '18 at 14:29







Ah, someone even pointed out a second math.se version below I was previously unaware of: math.stackexchange.com/q/5465/29335

– rschwieb
Nov 14 '18 at 14:29












5 Answers
5






active

oldest

votes


















23














Stadium Shape



As a geometric figure.




A stadium is a geometric figure consisting of a rectangle with top and bottom lengths a whose ends are capped off with semicircles of radius r.




enter image description here



Sources mathworld.wolfram.com/Stadium.html / mentalfloss.com





Capsule Shape



Following @Rafael's answer, there are many results in Google as Capsule Shape






share|improve this answer





















  • 2





    In the US I'm sure a lot of ppl think of a Baseball stadium.

    – Rafael
    Nov 12 '18 at 16:25






  • 1





    Perhaps because of my primarily 3D design area of knowledge, I refer to this form and shape as a capsule - though that is most often applied to the 3D solid of similar form, it's also often used for the 2D silhouette of that same form. en.wikipedia.org/wiki/Capsule_(geometry)

    – GerardFalla
    Nov 13 '18 at 21:36






  • 1





    I've seen it called a "racetrack" as well, same basic idea.

    – whatsisname
    Nov 14 '18 at 5:48



















25














While perhaps not the "technical" term for it.. I see it often called a Pill Shape.






share|improve this answer



















  • 2





    This is the terminology Twitter's design team uses: getbootstrap.com/docs/4.1/components/badge/#pill-badges

    – btown
    Nov 13 '18 at 5:52











  • I like this one too, although the bigger the major axis gets, the less appropriate it seems :)

    – rschwieb
    Nov 14 '18 at 14:35



















4














For me, it is a rounded rectangle just because the tool I would use is a rectangle and I would round it.



On a 3D model, I would use a sphere and move some vertexes.



But for non-graphic designers, I would call it a "Pill shape" Probably Penicillin pill shape.






share|improve this answer































    4














    Obround is another alternative. See this question on math.stackexchange or the wiktionary definition.



    Two out of Wikipedia's five stadium references use obround instead.






    share|improve this answer































      0














      A technical word for this kind of shape is Oblong.



      See : https://www.vocabulary.com/dictionary/oblong






      share|improve this answer
























      • By definition, an oblong is more general term, not describing shape of the corners. It might work in some communities but be confusing in general use.

        – miroxlav
        Nov 13 '18 at 15:41








      • 1





        @miroxlav the definition changes between UK and US English.

        – Pete Kirkham
        Nov 13 '18 at 17:26











      • Quote: "If you stretch a circle until it becomes an oval" you get an oval, an ellipse.

        – Rafael
        Nov 13 '18 at 18:32











      • @PeteKirkham – it does, but which one exactly describes the above shape? I think neither.

        – miroxlav
        Nov 13 '18 at 20:40











      • Agree that oblong has very large meaning but it could be a word for this kind of shape. Also there is no specific word for every trapezoid maybe there is none for an elongated shape without perfectly rounded corner.

        – David Horizonef
        Nov 14 '18 at 8:21











      Your Answer








      StackExchange.ready(function() {
      var channelOptions = {
      tags: "".split(" "),
      id: "174"
      };
      initTagRenderer("".split(" "), "".split(" "), channelOptions);

      StackExchange.using("externalEditor", function() {
      // Have to fire editor after snippets, if snippets enabled
      if (StackExchange.settings.snippets.snippetsEnabled) {
      StackExchange.using("snippets", function() {
      createEditor();
      });
      }
      else {
      createEditor();
      }
      });

      function createEditor() {
      StackExchange.prepareEditor({
      heartbeatType: 'answer',
      autoActivateHeartbeat: false,
      convertImagesToLinks: false,
      noModals: true,
      showLowRepImageUploadWarning: true,
      reputationToPostImages: null,
      bindNavPrevention: true,
      postfix: "",
      imageUploader: {
      brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
      contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
      allowUrls: true
      },
      onDemand: true,
      discardSelector: ".discard-answer"
      ,immediatelyShowMarkdownHelp:true
      });


      }
      });














      draft saved

      draft discarded


















      StackExchange.ready(
      function () {
      StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fgraphicdesign.stackexchange.com%2fquestions%2f117005%2fwhat-is-this-shape-that-looks-like-a-rectangle-with-rounded-ends-called%23new-answer', 'question_page');
      }
      );

      Post as a guest















      Required, but never shown

























      5 Answers
      5






      active

      oldest

      votes








      5 Answers
      5






      active

      oldest

      votes









      active

      oldest

      votes






      active

      oldest

      votes









      23














      Stadium Shape



      As a geometric figure.




      A stadium is a geometric figure consisting of a rectangle with top and bottom lengths a whose ends are capped off with semicircles of radius r.




      enter image description here



      Sources mathworld.wolfram.com/Stadium.html / mentalfloss.com





      Capsule Shape



      Following @Rafael's answer, there are many results in Google as Capsule Shape






      share|improve this answer





















      • 2





        In the US I'm sure a lot of ppl think of a Baseball stadium.

        – Rafael
        Nov 12 '18 at 16:25






      • 1





        Perhaps because of my primarily 3D design area of knowledge, I refer to this form and shape as a capsule - though that is most often applied to the 3D solid of similar form, it's also often used for the 2D silhouette of that same form. en.wikipedia.org/wiki/Capsule_(geometry)

        – GerardFalla
        Nov 13 '18 at 21:36






      • 1





        I've seen it called a "racetrack" as well, same basic idea.

        – whatsisname
        Nov 14 '18 at 5:48
















      23














      Stadium Shape



      As a geometric figure.




      A stadium is a geometric figure consisting of a rectangle with top and bottom lengths a whose ends are capped off with semicircles of radius r.




      enter image description here



      Sources mathworld.wolfram.com/Stadium.html / mentalfloss.com





      Capsule Shape



      Following @Rafael's answer, there are many results in Google as Capsule Shape






      share|improve this answer





















      • 2





        In the US I'm sure a lot of ppl think of a Baseball stadium.

        – Rafael
        Nov 12 '18 at 16:25






      • 1





        Perhaps because of my primarily 3D design area of knowledge, I refer to this form and shape as a capsule - though that is most often applied to the 3D solid of similar form, it's also often used for the 2D silhouette of that same form. en.wikipedia.org/wiki/Capsule_(geometry)

        – GerardFalla
        Nov 13 '18 at 21:36






      • 1





        I've seen it called a "racetrack" as well, same basic idea.

        – whatsisname
        Nov 14 '18 at 5:48














      23












      23








      23







      Stadium Shape



      As a geometric figure.




      A stadium is a geometric figure consisting of a rectangle with top and bottom lengths a whose ends are capped off with semicircles of radius r.




      enter image description here



      Sources mathworld.wolfram.com/Stadium.html / mentalfloss.com





      Capsule Shape



      Following @Rafael's answer, there are many results in Google as Capsule Shape






      share|improve this answer















      Stadium Shape



      As a geometric figure.




      A stadium is a geometric figure consisting of a rectangle with top and bottom lengths a whose ends are capped off with semicircles of radius r.




      enter image description here



      Sources mathworld.wolfram.com/Stadium.html / mentalfloss.com





      Capsule Shape



      Following @Rafael's answer, there are many results in Google as Capsule Shape







      share|improve this answer














      share|improve this answer



      share|improve this answer








      edited Nov 12 '18 at 16:31

























      answered Nov 12 '18 at 16:06









      DanielilloDanielillo

      20.7k13171




      20.7k13171








      • 2





        In the US I'm sure a lot of ppl think of a Baseball stadium.

        – Rafael
        Nov 12 '18 at 16:25






      • 1





        Perhaps because of my primarily 3D design area of knowledge, I refer to this form and shape as a capsule - though that is most often applied to the 3D solid of similar form, it's also often used for the 2D silhouette of that same form. en.wikipedia.org/wiki/Capsule_(geometry)

        – GerardFalla
        Nov 13 '18 at 21:36






      • 1





        I've seen it called a "racetrack" as well, same basic idea.

        – whatsisname
        Nov 14 '18 at 5:48














      • 2





        In the US I'm sure a lot of ppl think of a Baseball stadium.

        – Rafael
        Nov 12 '18 at 16:25






      • 1





        Perhaps because of my primarily 3D design area of knowledge, I refer to this form and shape as a capsule - though that is most often applied to the 3D solid of similar form, it's also often used for the 2D silhouette of that same form. en.wikipedia.org/wiki/Capsule_(geometry)

        – GerardFalla
        Nov 13 '18 at 21:36






      • 1





        I've seen it called a "racetrack" as well, same basic idea.

        – whatsisname
        Nov 14 '18 at 5:48








      2




      2





      In the US I'm sure a lot of ppl think of a Baseball stadium.

      – Rafael
      Nov 12 '18 at 16:25





      In the US I'm sure a lot of ppl think of a Baseball stadium.

      – Rafael
      Nov 12 '18 at 16:25




      1




      1





      Perhaps because of my primarily 3D design area of knowledge, I refer to this form and shape as a capsule - though that is most often applied to the 3D solid of similar form, it's also often used for the 2D silhouette of that same form. en.wikipedia.org/wiki/Capsule_(geometry)

      – GerardFalla
      Nov 13 '18 at 21:36





      Perhaps because of my primarily 3D design area of knowledge, I refer to this form and shape as a capsule - though that is most often applied to the 3D solid of similar form, it's also often used for the 2D silhouette of that same form. en.wikipedia.org/wiki/Capsule_(geometry)

      – GerardFalla
      Nov 13 '18 at 21:36




      1




      1





      I've seen it called a "racetrack" as well, same basic idea.

      – whatsisname
      Nov 14 '18 at 5:48





      I've seen it called a "racetrack" as well, same basic idea.

      – whatsisname
      Nov 14 '18 at 5:48











      25














      While perhaps not the "technical" term for it.. I see it often called a Pill Shape.






      share|improve this answer



















      • 2





        This is the terminology Twitter's design team uses: getbootstrap.com/docs/4.1/components/badge/#pill-badges

        – btown
        Nov 13 '18 at 5:52











      • I like this one too, although the bigger the major axis gets, the less appropriate it seems :)

        – rschwieb
        Nov 14 '18 at 14:35
















      25














      While perhaps not the "technical" term for it.. I see it often called a Pill Shape.






      share|improve this answer



















      • 2





        This is the terminology Twitter's design team uses: getbootstrap.com/docs/4.1/components/badge/#pill-badges

        – btown
        Nov 13 '18 at 5:52











      • I like this one too, although the bigger the major axis gets, the less appropriate it seems :)

        – rschwieb
        Nov 14 '18 at 14:35














      25












      25








      25







      While perhaps not the "technical" term for it.. I see it often called a Pill Shape.






      share|improve this answer













      While perhaps not the "technical" term for it.. I see it often called a Pill Shape.







      share|improve this answer












      share|improve this answer



      share|improve this answer










      answered Nov 12 '18 at 16:32









      ScottScott

      145k14199410




      145k14199410








      • 2





        This is the terminology Twitter's design team uses: getbootstrap.com/docs/4.1/components/badge/#pill-badges

        – btown
        Nov 13 '18 at 5:52











      • I like this one too, although the bigger the major axis gets, the less appropriate it seems :)

        – rschwieb
        Nov 14 '18 at 14:35














      • 2





        This is the terminology Twitter's design team uses: getbootstrap.com/docs/4.1/components/badge/#pill-badges

        – btown
        Nov 13 '18 at 5:52











      • I like this one too, although the bigger the major axis gets, the less appropriate it seems :)

        – rschwieb
        Nov 14 '18 at 14:35








      2




      2





      This is the terminology Twitter's design team uses: getbootstrap.com/docs/4.1/components/badge/#pill-badges

      – btown
      Nov 13 '18 at 5:52





      This is the terminology Twitter's design team uses: getbootstrap.com/docs/4.1/components/badge/#pill-badges

      – btown
      Nov 13 '18 at 5:52













      I like this one too, although the bigger the major axis gets, the less appropriate it seems :)

      – rschwieb
      Nov 14 '18 at 14:35





      I like this one too, although the bigger the major axis gets, the less appropriate it seems :)

      – rschwieb
      Nov 14 '18 at 14:35











      4














      For me, it is a rounded rectangle just because the tool I would use is a rectangle and I would round it.



      On a 3D model, I would use a sphere and move some vertexes.



      But for non-graphic designers, I would call it a "Pill shape" Probably Penicillin pill shape.






      share|improve this answer




























        4














        For me, it is a rounded rectangle just because the tool I would use is a rectangle and I would round it.



        On a 3D model, I would use a sphere and move some vertexes.



        But for non-graphic designers, I would call it a "Pill shape" Probably Penicillin pill shape.






        share|improve this answer


























          4












          4








          4







          For me, it is a rounded rectangle just because the tool I would use is a rectangle and I would round it.



          On a 3D model, I would use a sphere and move some vertexes.



          But for non-graphic designers, I would call it a "Pill shape" Probably Penicillin pill shape.






          share|improve this answer













          For me, it is a rounded rectangle just because the tool I would use is a rectangle and I would round it.



          On a 3D model, I would use a sphere and move some vertexes.



          But for non-graphic designers, I would call it a "Pill shape" Probably Penicillin pill shape.







          share|improve this answer












          share|improve this answer



          share|improve this answer










          answered Nov 12 '18 at 16:21









          RafaelRafael

          22.5k12355




          22.5k12355























              4














              Obround is another alternative. See this question on math.stackexchange or the wiktionary definition.



              Two out of Wikipedia's five stadium references use obround instead.






              share|improve this answer




























                4














                Obround is another alternative. See this question on math.stackexchange or the wiktionary definition.



                Two out of Wikipedia's five stadium references use obround instead.






                share|improve this answer


























                  4












                  4








                  4







                  Obround is another alternative. See this question on math.stackexchange or the wiktionary definition.



                  Two out of Wikipedia's five stadium references use obround instead.






                  share|improve this answer













                  Obround is another alternative. See this question on math.stackexchange or the wiktionary definition.



                  Two out of Wikipedia's five stadium references use obround instead.







                  share|improve this answer












                  share|improve this answer



                  share|improve this answer










                  answered Nov 13 '18 at 17:36









                  Pete KirkhamPete Kirkham

                  1513




                  1513























                      0














                      A technical word for this kind of shape is Oblong.



                      See : https://www.vocabulary.com/dictionary/oblong






                      share|improve this answer
























                      • By definition, an oblong is more general term, not describing shape of the corners. It might work in some communities but be confusing in general use.

                        – miroxlav
                        Nov 13 '18 at 15:41








                      • 1





                        @miroxlav the definition changes between UK and US English.

                        – Pete Kirkham
                        Nov 13 '18 at 17:26











                      • Quote: "If you stretch a circle until it becomes an oval" you get an oval, an ellipse.

                        – Rafael
                        Nov 13 '18 at 18:32











                      • @PeteKirkham – it does, but which one exactly describes the above shape? I think neither.

                        – miroxlav
                        Nov 13 '18 at 20:40











                      • Agree that oblong has very large meaning but it could be a word for this kind of shape. Also there is no specific word for every trapezoid maybe there is none for an elongated shape without perfectly rounded corner.

                        – David Horizonef
                        Nov 14 '18 at 8:21
















                      0














                      A technical word for this kind of shape is Oblong.



                      See : https://www.vocabulary.com/dictionary/oblong






                      share|improve this answer
























                      • By definition, an oblong is more general term, not describing shape of the corners. It might work in some communities but be confusing in general use.

                        – miroxlav
                        Nov 13 '18 at 15:41








                      • 1





                        @miroxlav the definition changes between UK and US English.

                        – Pete Kirkham
                        Nov 13 '18 at 17:26











                      • Quote: "If you stretch a circle until it becomes an oval" you get an oval, an ellipse.

                        – Rafael
                        Nov 13 '18 at 18:32











                      • @PeteKirkham – it does, but which one exactly describes the above shape? I think neither.

                        – miroxlav
                        Nov 13 '18 at 20:40











                      • Agree that oblong has very large meaning but it could be a word for this kind of shape. Also there is no specific word for every trapezoid maybe there is none for an elongated shape without perfectly rounded corner.

                        – David Horizonef
                        Nov 14 '18 at 8:21














                      0












                      0








                      0







                      A technical word for this kind of shape is Oblong.



                      See : https://www.vocabulary.com/dictionary/oblong






                      share|improve this answer













                      A technical word for this kind of shape is Oblong.



                      See : https://www.vocabulary.com/dictionary/oblong







                      share|improve this answer












                      share|improve this answer



                      share|improve this answer










                      answered Nov 13 '18 at 10:56









                      David HorizonefDavid Horizonef

                      345




                      345













                      • By definition, an oblong is more general term, not describing shape of the corners. It might work in some communities but be confusing in general use.

                        – miroxlav
                        Nov 13 '18 at 15:41








                      • 1





                        @miroxlav the definition changes between UK and US English.

                        – Pete Kirkham
                        Nov 13 '18 at 17:26











                      • Quote: "If you stretch a circle until it becomes an oval" you get an oval, an ellipse.

                        – Rafael
                        Nov 13 '18 at 18:32











                      • @PeteKirkham – it does, but which one exactly describes the above shape? I think neither.

                        – miroxlav
                        Nov 13 '18 at 20:40











                      • Agree that oblong has very large meaning but it could be a word for this kind of shape. Also there is no specific word for every trapezoid maybe there is none for an elongated shape without perfectly rounded corner.

                        – David Horizonef
                        Nov 14 '18 at 8:21



















                      • By definition, an oblong is more general term, not describing shape of the corners. It might work in some communities but be confusing in general use.

                        – miroxlav
                        Nov 13 '18 at 15:41








                      • 1





                        @miroxlav the definition changes between UK and US English.

                        – Pete Kirkham
                        Nov 13 '18 at 17:26











                      • Quote: "If you stretch a circle until it becomes an oval" you get an oval, an ellipse.

                        – Rafael
                        Nov 13 '18 at 18:32











                      • @PeteKirkham – it does, but which one exactly describes the above shape? I think neither.

                        – miroxlav
                        Nov 13 '18 at 20:40











                      • Agree that oblong has very large meaning but it could be a word for this kind of shape. Also there is no specific word for every trapezoid maybe there is none for an elongated shape without perfectly rounded corner.

                        – David Horizonef
                        Nov 14 '18 at 8:21

















                      By definition, an oblong is more general term, not describing shape of the corners. It might work in some communities but be confusing in general use.

                      – miroxlav
                      Nov 13 '18 at 15:41







                      By definition, an oblong is more general term, not describing shape of the corners. It might work in some communities but be confusing in general use.

                      – miroxlav
                      Nov 13 '18 at 15:41






                      1




                      1





                      @miroxlav the definition changes between UK and US English.

                      – Pete Kirkham
                      Nov 13 '18 at 17:26





                      @miroxlav the definition changes between UK and US English.

                      – Pete Kirkham
                      Nov 13 '18 at 17:26













                      Quote: "If you stretch a circle until it becomes an oval" you get an oval, an ellipse.

                      – Rafael
                      Nov 13 '18 at 18:32





                      Quote: "If you stretch a circle until it becomes an oval" you get an oval, an ellipse.

                      – Rafael
                      Nov 13 '18 at 18:32













                      @PeteKirkham – it does, but which one exactly describes the above shape? I think neither.

                      – miroxlav
                      Nov 13 '18 at 20:40





                      @PeteKirkham – it does, but which one exactly describes the above shape? I think neither.

                      – miroxlav
                      Nov 13 '18 at 20:40













                      Agree that oblong has very large meaning but it could be a word for this kind of shape. Also there is no specific word for every trapezoid maybe there is none for an elongated shape without perfectly rounded corner.

                      – David Horizonef
                      Nov 14 '18 at 8:21





                      Agree that oblong has very large meaning but it could be a word for this kind of shape. Also there is no specific word for every trapezoid maybe there is none for an elongated shape without perfectly rounded corner.

                      – David Horizonef
                      Nov 14 '18 at 8:21


















                      draft saved

                      draft discarded




















































                      Thanks for contributing an answer to Graphic Design Stack Exchange!


                      • Please be sure to answer the question. Provide details and share your research!

                      But avoid



                      • Asking for help, clarification, or responding to other answers.

                      • Making statements based on opinion; back them up with references or personal experience.


                      To learn more, see our tips on writing great answers.




                      draft saved


                      draft discarded














                      StackExchange.ready(
                      function () {
                      StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fgraphicdesign.stackexchange.com%2fquestions%2f117005%2fwhat-is-this-shape-that-looks-like-a-rectangle-with-rounded-ends-called%23new-answer', 'question_page');
                      }
                      );

                      Post as a guest















                      Required, but never shown





















































                      Required, but never shown














                      Required, but never shown












                      Required, but never shown







                      Required, but never shown

































                      Required, but never shown














                      Required, but never shown












                      Required, but never shown







                      Required, but never shown







                      Popular posts from this blog

                      Full-time equivalent

                      Bicuculline